The EX's sheilds at endor

PSW: discuss Star Wars without "versus" arguments.

Moderator: Vympel

Post Reply
Marko Dash
Jedi Knight
Posts: 719
Joined: 2006-01-29 03:42am
Location: south carolina, USA
Contact:

The EX's sheilds at endor

Post by Marko Dash »

I think I hit on something.

What if during the time the rebel ships were all firing on the Executor the shielding crew started using the particle shield radiators to help keep the ray shields up? With both sets running it would of allowed the ship to better withstand the onslaught, but it allowed a few starfighters to slip in.
If a black-hawk flies over a light show and is not harmed, does that make it immune to lasers?
User avatar
Ryan Thunder
Village Idiot
Posts: 4139
Joined: 2007-09-16 07:53pm
Location: Canada

Post by Ryan Thunder »

Hmm... I suppose you mean sending power intended for them to the ray shields instead, right?

Its an interesting idea, but then they could have kept them raised around the bridge area, couldn't they?
SDN Worlds 5: Sanctum
Marko Dash
Jedi Knight
Posts: 719
Joined: 2006-01-29 03:42am
Location: south carolina, USA
Contact:

Post by Marko Dash »

no i mean using them to help distribute the incoming power instead of having it fry the first set
If a black-hawk flies over a light show and is not harmed, does that make it immune to lasers?
User avatar
Ryan Thunder
Village Idiot
Posts: 4139
Joined: 2007-09-16 07:53pm
Location: Canada

Post by Ryan Thunder »

Marko Dash wrote:no i mean using them to help distribute the incoming power instead of having it fry the first set
If you mean what I think you mean, I'm not sure if its even possible. :?
SDN Worlds 5: Sanctum
User avatar
Mad
Jedi Council Member
Posts: 1923
Joined: 2002-07-04 01:32am
Location: North Carolina, USA
Contact:

Re: The EX's sheilds at endor

Post by Mad »

Marko Dash wrote:What if during the time the rebel ships were all firing on the Executor the shielding crew started using the particle shield radiators to help keep the ray shields up? With both sets running it would of allowed the ship to better withstand the onslaught, but it allowed a few starfighters to slip in.
Why would the radiators for different shield types necessarily be separated? (And that's assuming two different systems were used on the Executor.)
Later...
User avatar
Ender
Emperor's Hand
Posts: 11323
Joined: 2002-07-30 11:12pm
Location: Illinois

Re: The EX's sheilds at endor

Post by Ender »

Marko Dash wrote:I think I hit on something.

What if during the time the rebel ships were all firing on the Executor the shielding crew started using the particle shield radiators to help keep the ray shields up? With both sets running it would of allowed the ship to better withstand the onslaught, but it allowed a few starfighters to slip in.
Why would particle shields need radiators? All they do is apply counterforce, they would be no different from the acceleration compensators. A particle shield vs a railgun round should work by applying force against the projectile. Energy would be conserved as the projectile deforms and heats, just as it would had it struck the hull. Energy shields would still be needed to take care of the thermal energy that the now destroyed projectile would be depositing.
بيرني كان سيفوز
*
Nuclear Navy Warwolf
*
in omnibus requiem quaesivi, et nusquam inveni nisi in angulo cum libro
*
ipsa scientia potestas est
User avatar
Isolder74
Official SD.Net Ace of Cakes
Posts: 6762
Joined: 2002-07-10 01:16am
Location: Weber State of Construction University
Contact:

Re: The EX's sheilds at endor

Post by Isolder74 »

Ender wrote:
Marko Dash wrote:I think I hit on something.

What if during the time the rebel ships were all firing on the Executor the shielding crew started using the particle shield radiators to help keep the ray shields up? With both sets running it would of allowed the ship to better withstand the onslaught, but it allowed a few starfighters to slip in.
Why would particle shields need radiators? All they do is apply counterforce, they would be no different from the acceleration compensators. A particle shield vs a railgun round should work by applying force against the projectile. Energy would be conserved as the projectile deforms and heats, just as it would had it struck the hull. Energy shields would still be needed to take care of the thermal energy that the now destroyed projectile would be depositing.
Perhaps to radiate the heat produced in the field generator creating the opposing force repelling the incoming projectile?
Hapan Battle Dragons Rule!
When you want peace prepare for war! --Confusious
That was disapointing ..Should we show this Federation how to build a ship so we may have worthy foes? Typhonis 1
The Prince of The Writer's Guild|HAB Spacewolf Tank General| God Bless America!
User avatar
DogsOfWar
Youngling
Posts: 60
Joined: 2007-08-29 01:08am
Location: Staring at my monitor with blood-shot eyes

Post by DogsOfWar »

Even if the particle shields had radiators and they were used to supplement the ray shield radiators, why would that weaken the particle shields? It's not like they would have to shut off the particle shields to dump some extra energy into their radiators.
[img=left]http://img530.imageshack.us/img530/8059 ... empim9.jpg[/img]The smallest minds have the biggest mouths - Florist shop sign
~~~~~~~~~
Only here is shoving hundreds of chimpanzees up a giant lizard's anus considered a viable tactic. - NecronLord
~~~~~~~~~
How can you lose a basestar?! - Me playing Battlestar Galactica on Xbox
User avatar
Norade
Jedi Council Member
Posts: 2424
Joined: 2005-09-23 11:33pm
Location: Kelowna, BC, Canada
Contact:

Post by Norade »

IIRC particle shields are stated to use very little power which is why they can always be active; Ray shields are so power intensive that they're only raised for combat. I don't see what, if it's even possible, they would gain by dumping so little power to the Ray shield.
User avatar
Connor MacLeod
Sith Apprentice
Posts: 14065
Joined: 2002-08-01 05:03pm
Contact:

Re: The EX's sheilds at endor

Post by Connor MacLeod »

Isolder74 wrote:
Ender wrote:
Marko Dash wrote:I think I hit on something.

What if during the time the rebel ships were all firing on the Executor the shielding crew started using the particle shield radiators to help keep the ray shields up? With both sets running it would of allowed the ship to better withstand the onslaught, but it allowed a few starfighters to slip in.
Why would particle shields need radiators? All they do is apply counterforce, they would be no different from the acceleration compensators. A particle shield vs a railgun round should work by applying force against the projectile. Energy would be conserved as the projectile deforms and heats, just as it would had it struck the hull. Energy shields would still be needed to take care of the thermal energy that the now destroyed projectile would be depositing.
Perhaps to radiate the heat produced in the field generator creating the opposing force repelling the incoming projectile?
The point Mad and Ender are making is that there's no reason for ray and particle shields to use separate radiators or heat sinks - its all energy (kinetic or otherwise) they absorb and dump into the sinks (and eventually dispose of) so "generator specific) radiators are irrelevant.

The only way "ray/particle" shields differ is in the kinds of attacks they're designed to deal with a massless beam cannot be stopped in the same way as a solid object (even a particle beam and projectile can differ in terms of stoppage.) But they all "transmit" energy to the shield generators, and that energy gets absorbed.
User avatar
Connor MacLeod
Sith Apprentice
Posts: 14065
Joined: 2002-08-01 05:03pm
Contact:

Post by Connor MacLeod »

Norade wrote:IIRC particle shields are stated to use very little power which is why they can always be active; Ray shields are so power intensive that they're only raised for combat. I don't see what, if it's even possible, they would gain by dumping so little power to the Ray shield.
What does a ray shield do that necessitates it drawing moer power than a parrticle shield? There's no reason it neccesarily needs more energy than a particle shield, and if it consumes energy it must do work.
User avatar
Connor MacLeod
Sith Apprentice
Posts: 14065
Joined: 2002-08-01 05:03pm
Contact:

Post by Connor MacLeod »

Marko Dash wrote:no i mean using them to help distribute the incoming power instead of having it fry the first set
If you mean "what if the REbels over-optimized their defenses to handle energy weapon attacks but not projectiles - it might amke some sense, however why would they fail to ignore the threat of projectile weapons? Proton torpedoes and concussion missiles are still part of shipboard armament and would be stopped by parrticle shielding.
User avatar
Norade
Jedi Council Member
Posts: 2424
Joined: 2005-09-23 11:33pm
Location: Kelowna, BC, Canada
Contact:

Post by Norade »

Connor MacLeod wrote:
Norade wrote:IIRC particle shields are stated to use very little power which is why they can always be active; Ray shields are so power intensive that they're only raised for combat. I don't see what, if it's even possible, they would gain by dumping so little power to the Ray shield.
What does a ray shield do that necessitates it drawing moer power than a parrticle shield? There's no reason it neccesarily needs more energy than a particle shield, and if it consumes energy it must do work.
I was going by what the Guide to Vehicles and Vessels had to say, and as near as I can tell that's still cannon.
Marko Dash
Jedi Knight
Posts: 719
Joined: 2006-01-29 03:42am
Location: south carolina, USA
Contact:

Post by Marko Dash »

I'm assuming the each shield system has its own set, otherwise stressing one would limit the other, and by using some of the PS's sinks the RSs could hold out longer.
If a black-hawk flies over a light show and is not harmed, does that make it immune to lasers?
User avatar
Mad
Jedi Council Member
Posts: 1923
Joined: 2002-07-04 01:32am
Location: North Carolina, USA
Contact:

Post by Mad »

Marko Dash wrote:I'm assuming the each shield system has its own set, otherwise stressing one would limit the other, and by using some of the PS's sinks the RSs could hold out longer.
Why would they each have their own set of radiators? As you point out, the shields getting pounded the hardest will last longer if all available radiators are used. And, really, letting the combat shields last as long as they can is pretty much the general idea.
Later...
User avatar
drachefly
Jedi Master
Posts: 1323
Joined: 2004-10-13 12:24pm

Post by drachefly »

Could be that they're completely distinct technologies, which covers that question nicely, I think.
User avatar
Mad
Jedi Council Member
Posts: 1923
Joined: 2002-07-04 01:32am
Location: North Carolina, USA
Contact:

Post by Mad »

drachefly wrote:Could be that they're completely distinct technologies, which covers that question nicely, I think.
What, they have incompatible waste heat or something?
Later...
User avatar
Isolder74
Official SD.Net Ace of Cakes
Posts: 6762
Joined: 2002-07-10 01:16am
Location: Weber State of Construction University
Contact:

Post by Isolder74 »

Mad wrote:
Marko Dash wrote:I'm assuming the each shield system has its own set, otherwise stressing one would limit the other, and by using some of the PS's sinks the RSs could hold out longer.
Why would they each have their own set of radiators? As you point out, the shields getting pounded the hardest will last longer if all available radiators are used. And, really, letting the combat shields last as long as they can is pretty much the general idea.
The two systems having seperate physical heat sinks and radiators can be chalked up to an attempt at redundancy. Both having seperate but apperently networked(or the trick in question wouldn't work at all) radiators and heat sinks means less of a change a glancing hit will knock out the radiators to both.
Hapan Battle Dragons Rule!
When you want peace prepare for war! --Confusious
That was disapointing ..Should we show this Federation how to build a ship so we may have worthy foes? Typhonis 1
The Prince of The Writer's Guild|HAB Spacewolf Tank General| God Bless America!
User avatar
Mad
Jedi Council Member
Posts: 1923
Joined: 2002-07-04 01:32am
Location: North Carolina, USA
Contact:

Post by Mad »

Isolder74 wrote:The two systems having seperate physical heat sinks and radiators can be chalked up to an attempt at redundancy.
Evidence that this is done?
Both having seperate but apperently networked(or the trick in question wouldn't work at all) radiators and heat sinks means less of a change a glancing hit will knock out the radiators to both.
When has one shield type ever fallen without taking the other with it?
Later...
User avatar
Connor MacLeod
Sith Apprentice
Posts: 14065
Joined: 2002-08-01 05:03pm
Contact:

Post by Connor MacLeod »

You guys aren't grasping the issue here. What differencee is there between the kinetic energy of a physical impactor transferred to the target once its struck, and the energy of a laser or paticle beam once its's struck the target?

Separate methods of shield generation make sense. But once the energgy (kinetic or otherwise) is absorbed, those distinctions cease to matter as far as the absorption/retransmission ssystem is concerned. At best what you are proposing is that you have a double-redudnant shield system.. but why would you do that? Having a bigger single heat sink and radiator system makes as much sense, since there is no conceivable reason why the two systems would be incompatiable (as Mad says, do they have incompatible waste heat or something?)

Besides, I think you people need to actually look at some of the examples in the books and movies. TLs and missiles were both used in the ROTS and ROTJ battles, and once shields were knocked down both weapons could be used interchangably.

In both the Tyrant's Test novels, as well as the Stackpole and Allston X-wing novels (Specifically Bacta War, Isard's Revenge, and the Wraith Squadron books) proton torpedoes/concussion missiles and turbolaser/energy weapons are used interchangably to knock down shields and allow other attacks through (Lusankya in Bacta War, an ISD in Isard's Revenge, Iron fist in the stackpole novels, etc.)

Planetary shields attacked by a torpedo sphere use proton torpedoes, but oncee down the turbolasers could target through.
User avatar
drachefly
Jedi Master
Posts: 1323
Joined: 2004-10-13 12:24pm

Post by drachefly »

Mad wrote:What, they have incompatible waste heat or something?
Sorry, I missed the part where the OP clarified the original post in that way. I thought he meant 'radiator' to mean 'emitter'.
Post Reply