Testors Dullcote is your friend.Stormbringer wrote: As for the models themselves, I wouldn't bother with 'ardcoat. I got a simple semi-gloss varnish that's far tougher than the GW stuff, is cheaper, and isn't as shiny even with a very thick coat.

Moderator: Thanas
amen to that. I have found that gloss coats tend to protect betters, but kill any details in highlighting. As such I use a semigloss first toprotect the figure, then dullcoat to toane thing s down a touch, and allow the details to show.Darwin wrote:Testors Dullcote is your friend.Stormbringer wrote: As for the models themselves, I wouldn't bother with 'ardcoat. I got a simple semi-gloss varnish that's far tougher than the GW stuff, is cheaper, and isn't as shiny even with a very thick coat.
I use a semi-gloss because most of my miniatures are metals. I've got a lot of Grey Knights, some metal stormtroopers, and a fair number of older figs which are all metal (as well as Warmachine which is an all metal game). So I went with a semi-gloss because the formula is definitely more resistant to chipping, flaking, and rubbing off.Darwin wrote:Testors Dullcote is your friend.Stormbringer wrote: As for the models themselves, I wouldn't bother with 'ardcoat. I got a simple semi-gloss varnish that's far tougher than the GW stuff, is cheaper, and isn't as shiny even with a very thick coat.
Good stuff! I'll need to print out that blue-white fade sheet. One note, You can make a cheap lightbox by using a full-spectrum clip-light or two, and a plastic chest cooler. Yes, this really works, and it's pretty ingenious.Azazal wrote: As for lighting and taking pics of your minis, I recommend reading up over Here It's Thomas Schadle's* page, has some good simple info on taking pics of mini's.
* multiple Golden Daemon winner and a guy that hand out good advice quite often.