Monitor's "no signal" on my desktop
Moderator: Thanas
-
- Sith Devotee
- Posts: 3395
- Joined: 2005-07-31 06:48am
Monitor's "no signal" on my desktop
Ever since this weekend, whenever I turn on the computer and monitor, they haven't been getting a signal, despite...
1. Trying another monitor, using the same monitor cable.
2. Trying another monitor with its own monitor cable.
3. Replacing the video card (GeForce FX 5200) with a Mad Dog Predator Radeon 9250 AGP (128 MB DDR memory).
4. Cleaning the CPU heat sink and the heat sink-covering fan of dust. (The video card's own heat sink is clean.)
Any other things I can do?
1. Trying another monitor, using the same monitor cable.
2. Trying another monitor with its own monitor cable.
3. Replacing the video card (GeForce FX 5200) with a Mad Dog Predator Radeon 9250 AGP (128 MB DDR memory).
4. Cleaning the CPU heat sink and the heat sink-covering fan of dust. (The video card's own heat sink is clean.)
Any other things I can do?
"Yee's proposal is exactly the sort of thing I would expect some Washington legal eagle to do. In fact, it could even be argued it would be unrealistic to not have a scene in the next book of, say, a Congressman Yee submit the Yee Act for consideration. " - bcoogler on this
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
Reseating all cards and the memory in their sockets would be the next thing I'd try, along with making sure all the power connectors are properly plugged in.
If that fails, try resetting the system BIOS with the jumper on the motherboard.
If that fails, try resetting the system BIOS with the jumper on the motherboard.
"You say that it is your custom to burn widows. Very well. We also have a custom: when men burn a woman alive, we tie a rope around their necks and we hang them. Build your funeral pyre; beside it, my carpenters will build a gallows. You may follow your custom. And then we will follow ours."- General Sir Charles Napier
Oderint dum metuant
Oderint dum metuant
-
- Sith Devotee
- Posts: 3395
- Joined: 2005-07-31 06:48am
Didn't change these between the time before the problem nor after, so I could do them just because, but seeing the next option...Glocksman wrote:Reseating all cards and the memory in their sockets would be the next thing I'd try, along with making sure all the power connectors are properly plugged in.
How would I do this?If that fails, try resetting the system BIOS with the jumper on the motherboard.
"Yee's proposal is exactly the sort of thing I would expect some Washington legal eagle to do. In fact, it could even be argued it would be unrealistic to not have a scene in the next book of, say, a Congressman Yee submit the Yee Act for consideration. " - bcoogler on this
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
In your motherboard's manual, it should list a 'reset CMOS' jumper.
It varies slightly, but the usual procedure is to unplug the power cord, remove the battery, move the jumper according to your manual's instructions, reinstall the battery, plug the power back in, and then boot back into the BIOS to reconfigure everything.
It varies slightly, but the usual procedure is to unplug the power cord, remove the battery, move the jumper according to your manual's instructions, reinstall the battery, plug the power back in, and then boot back into the BIOS to reconfigure everything.
"You say that it is your custom to burn widows. Very well. We also have a custom: when men burn a woman alive, we tie a rope around their necks and we hang them. Build your funeral pyre; beside it, my carpenters will build a gallows. You may follow your custom. And then we will follow ours."- General Sir Charles Napier
Oderint dum metuant
Oderint dum metuant
- The Yosemite Bear
- Mostly Harmless Nutcase (Requiescat in Pace)
- Posts: 35211
- Joined: 2002-07-21 02:38am
- Location: Dave's Not Here Man
Yeah, the the CMOS reset and card reseating doesn't work, odds are it's a hardware failure of some kind.The Yosemite Bear wrote:sounds just like what I had when my powersupply burned out.
there was just enough juice going to start up the fans, and the HDD light, but no where else was working.
The problem is it could be a lot of things, from a bad stick of RAM, a burnt out processor, a bad PSU, to a motherboard failure or a short somewhere.
"You say that it is your custom to burn widows. Very well. We also have a custom: when men burn a woman alive, we tie a rope around their necks and we hang them. Build your funeral pyre; beside it, my carpenters will build a gallows. You may follow your custom. And then we will follow ours."- General Sir Charles Napier
Oderint dum metuant
Oderint dum metuant
-
- Sith Devotee
- Posts: 3395
- Joined: 2005-07-31 06:48am
What if it is a hardware failure? (I've been told to treat it as an excuse for a new desktop.)
"Yee's proposal is exactly the sort of thing I would expect some Washington legal eagle to do. In fact, it could even be argued it would be unrealistic to not have a scene in the next book of, say, a Congressman Yee submit the Yee Act for consideration. " - bcoogler on this
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
Well, the problem with fails where you don't even get POST (bios screen) or beeps, is that you have no fucking idea what the hell it could be
Dead CPU
Dead Mobo
Dead GFX Card
Bad Ram
Failing PSU
Take your pick, oh and btw if you replace the wrong thing you run the risk of frying the new part, have fun!
Dead CPU
Dead Mobo
Dead GFX Card
Bad Ram
Failing PSU
Take your pick, oh and btw if you replace the wrong thing you run the risk of frying the new part, have fun!
“Most people are other people. Their thoughts are someone else's opinions, their lives a mimicry, their passions a quotation.” - Oscar Wilde.
- The Yosemite Bear
- Mostly Harmless Nutcase (Requiescat in Pace)
- Posts: 35211
- Joined: 2002-07-21 02:38am
- Location: Dave's Not Here Man
Re: Monitor's "no signal" on my desktop
Did you put the new card into the same slot as the old one?Edward Yee wrote:3. Replacing the video card (GeForce FX 5200) with a Mad Dog Predator Radeon 9250 AGP (128 MB DDR memory).
Re: Monitor's "no signal" on my desktop
He has an AGP, so it may be just the one slot.AMX wrote:Did you put the new card into the same slot as the old one?
I'm inclined to run with the "re-seat RAM" solution, or move RAM from slot to slot until you get something.
Have you gotten any beeps when you start it up? My MoBo has a little LED that shows it's getting power is it getting power?
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles."
-
- Sith Devotee
- Posts: 3395
- Joined: 2005-07-31 06:48am
As said, AGP, the motherboard seems to have that one graphics slot (with convenient push-lever as on RAM slots), so I did
Haven't had the time to try reseating the RAM yet. There is a bright red LED at the bottom of the motherboard that glows bright red, though, and when I tested the desktop with the case cover open an attached fan did run; I hear activity whenever I power on.
Haven't had the time to try reseating the RAM yet. There is a bright red LED at the bottom of the motherboard that glows bright red, though, and when I tested the desktop with the case cover open an attached fan did run; I hear activity whenever I power on.
"Yee's proposal is exactly the sort of thing I would expect some Washington legal eagle to do. In fact, it could even be argued it would be unrealistic to not have a scene in the next book of, say, a Congressman Yee submit the Yee Act for consideration. " - bcoogler on this
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
"My crystal ball is filled with smoke, and my hovercraft is full of eels." - Bayonet
Stark: "You can't even GET to heaven. You don't even know where it is, or even if it still exists."
SirNitram: "So storm Hell." - From the legendary thread
Any updates?
FWIW, my system did the exact same thing a few weeks ago, and it was caused by bad RAM.
Fortunately, Crucial is pretty quick at RMA's, but it sucked running on 1GB of DDR2-667 for a week while waiting for the replacement 2GB DDR2-800 Ballistix kit to arrive.
FWIW, my system did the exact same thing a few weeks ago, and it was caused by bad RAM.
Fortunately, Crucial is pretty quick at RMA's, but it sucked running on 1GB of DDR2-667 for a week while waiting for the replacement 2GB DDR2-800 Ballistix kit to arrive.
"You say that it is your custom to burn widows. Very well. We also have a custom: when men burn a woman alive, we tie a rope around their necks and we hang them. Build your funeral pyre; beside it, my carpenters will build a gallows. You may follow your custom. And then we will follow ours."- General Sir Charles Napier
Oderint dum metuant
Oderint dum metuant